Email: Sales@screwjack.net
Tel: +86-0769-83061993

Service Hotline
+86-0769-83061993
News
Home > News > Content

Product Categories

Miter Gearbox Principle Of Deceleration

Sijie Industrial Co.,Ltd | Updated: Oct 12, 2017

Gear box is based on modular structure modular design principle, greatly reducing the type of parts, Miter Gearbox suitable for large-scale production and flexible selection. Also known as gearboxes (ie transmissions) in automotive parts.

Due to the different driving conditions of the car,Miter Gearbox  it is required that the traveling speed and the driving torque of the vehicle can vary widely. For example, in the high-speed road speed should be able to reach 100km / h, and in the urban areas, the speed is often 50km / h or so. Empty vehicles in the straight on the road, the driving resistance is very small, then when loaded uphill, Miter Gearbox the driving resistance will be great. The characteristics of the car engine speed range is smaller, and the torque range can not meet the actual needs of the road.

The crankshaft of a car engine is generally only capable of turning in one direction, and the car sometimes needs to be able to go backwards, so the vehicle is often used to reverse the vehicle.

When the clutch is engaged, the gearbox can not output power. For example, it is possible to ensure that the driver releases the clutch pedal from the driver's seat when the engine does not turn off. Transmission by the variable speed transmission mechanism and variable speed control mechanism of two parts. Miter Gearbox The main function of the variable speed transmission mechanism is to change the value and direction of torque and speed; the main function of the control mechanism is to control the transmission mechanism, to achieve the transmission transmission ratio transformation, that is, to achieve shift to achieve variable speed torque.

The mechanical gearbox is mainly used to reduce the principle of gear transmission. Simply put, the gearbox has multiple sets of gears than the different gears, and the car when the shift behavior, Miter Gearbox that is, through the operation of the gearbox to the different gears work. Such as in the low speed, so that the transmission gear than the large work, and at high speed, Miter Gearbox so that the transmission gear than the small work.

Gearboxes are widely used in motors and are often used in wind turbines and are an important mechanical component whose main function is to transmit the power generated by the wind turbine to the generator and make it Get the corresponding speed. Usually the speed of the wind wheel is very low, Miter Gearbox far less than the required speed of the generator power generation, must be achieved through the gearbox gear pair growth, it will also be called gearbox gearbox. Gear box has the following role: 1, accelerated deceleration, is often said that the gearbox. 2. To change the direction of the drive, for example, we can use two fan gears to pass the force perpendicularly to another axis of rotation. 3, change the rotation torque. Under the same power conditions, the faster the speed of the gear, the shaft by the smaller torque, the greater the contrary. 4, clutch function: We can by separating the two originally engaged gear, to achieve the purpose of separating the engine from the load. Such as brake clutches. 5, Miter Gearbox the distribution of power. For example, we can use an engine, through the gearbox spindle to drive a number of slave, so as to achieve an engine to drive multiple load function.


Feedback
Send
Contact Us
Address: Xinji Road, Nancheng, Dongguan City, Guangdong Province, China.
Tel: +86-0769-83061993
Fax: +86-0769-88057667
E-mail: sales@screwjack.net
Copyright © Sijie Industrial Co.,Ltd All rights reserved.